Underfloor Heating

Varme Tile Backer Boards - Electric Underfloor Heating

Varme Tile Backer Boards

Price:
£11.74

:

 

We endeavour to offer the best prices available on the internet, please contact us if you have seen any of the products on this site cheaper anywhere else.

Price List

Thickness (mm) Width (mm) Length (mm) Weight (Kg/Board) U value (W/m2k) Price Purchase
Insulating Tilebacker Boards
6 600 1200 2.36 4.50 £12.91 Buy Online
10 600 1200 2.37 or 4.74 2.70 £12.91 Buy Online
20 600 1200 2.59 or 5.18 1.35 £15.25 Buy Online
30 600 1200 2.81 or 5.62 0.90 £16.81 Buy Online
40 600 1200 3.03 or 6.06 0.67 £18.77 Buy Online
50 600 1200 3.25 or 6.50 0.54 £19.76 Buy Online
60 600 1200 3.47 or 6.94 0.45 £20.77 Buy Online

back to top

Product Information

In order to maximise the efficiency of any heating system, insulation plays an important role - this is especially important when considering low temperature floor heating. Where new floors are being constructed in new buildings or conservatories, good quality insulation should be incorporated at the design stage.

As a direct result of the new building regulations there is now a wide choice of high quality materials available from a variety of manufacturers including Celotex see www.celotex.co.uk & kingspan - www.insulateonline.com. However the problem comes when electric underfloor heating is being installed in an existing building where taking up an un-insulated floor is often not a practical option.

In situations where there is an existing un-insulated floor the practical solution is to use an insulation board on top of the existing floor. Our range of board include Tilebacker Boards for use under tiled floors & Depron below wood or laminate floors:

Varme Board - Available in 7 thicknesses: from 6 to 60mm

In a conservatory which is to have underfloor heating & to be tiled, we strongly recommend the use of insulated tile-backer boards, like Varme Board. If you are still in the planning stage, we recommend that you ask your conservatory supplier/installer to leave the base slightly lower than normal in order that you can accomodate the tile-backer. The boards are supplied in thicknesses ranging from 6mm - 60mm depending on floor thresholds & your budget.

back to top

Product Search

Call back

Enter your details below if you would like one of our team to call you back.

Name:

Contact Number:

Preferred time for call back: