Underfloor Heating Cable Kit (4mm) - Electric Underfloor Heating

Cable Kits Include the following: 

• Heating cable.
• Programmable thermostat controller with floor probe.
• Adhesive tape to hold cable in place before tiling.
• Simple installation instructions.
• 16 year Warranty on cable.
• FREE Delivery

Cable Kits are the perfect solution for those awkward installations, able to be laid around fixed furniture (ie toilet and bath room suites).  Cable kits can be laid directly under tile into adhesive layer.  Alternatively, covered with an 8-10mm layer of self-levelling screed, the resulting floor can be overlaid with wood marble or even carpet. 

Cable kits are incredibly versatile.  With power output determined by the distance between cable runs (no less than 60mm), they can be used to provide secondary heating, ie warming up a cold tile floor, or as the primary heating source.  All our systems come with a 7-day programmable digital thermostat for maximum convenience and efficiency.

The cable delivers 12W/m and consists of 2 insulated heating cores and a protective earth wire in an aluminium foil coated screening sheaf and encased in a tough flexable outer jacket.  Each cable is fitted with a 3m Cold Lead.  Cable must not be reduced in length.

Consider the following and then choose the most suitable product from the table below:

• 100W/m2 Secondary heating and comfortable warm floors
• 150W/ m2 Primary heat source for most internal rooms
• 200W/m2 Areas of high heat loss and conservatories

(remember you can not lay more cable once the floor is in place but you can turn the thermostat down!)